Minimalist Home Design Ideas

How to Build a Plastic Storage Cabinets Shelves For Storing DVD

plastic storage cabinets at menards

If your DVD collection has begun to spill your storage unit, you do not need to buy other tower economical metal shelves. Build your own plastic storage cabinets is a simple and inexpensive solution. Not only is it relatively easy to do, but you can customize it by inserting plastic shelves to keep your collection organized. Once your collection is stored carefully in your new DVD cabinet, you never have to search through those stacks again.


  1. Measure the height, width and depth of the shelves plastic DVD using a tape measure. You can choose the type of plastic storage cabinets shelf you want, but it ought to be fairly simple with regard to design so as to easily slide straight into the wooden cabinet which you will build.
  2. Create a design for your desired cabinet in a piece of paper. You can split it into multiple compartments, using a plastic storage cabinets shelf in each DVD.
  3. Cut two sheets of 1/2 inch (1.3 cm) plywood the width and depth of all your cabinet using a circular saw. If you build multi-compartment meets the width of each and a roughly 1/2 inch (1.3 cm) of each divider involving the compartments to discover the total width in the cabinet.
  4. Use the circular saw to cut two sheets to the desired height of your cabinet saw.
  5. Arrange the four leaves just cut into a rectangular shape, positioning the plates towards the top in the longest narrow edges. Squeezes the side panels between the ends of the top and bottom of the panels.
  6. Cut additional sheets of 1/2 inch (1.3 cm) to the size of the dividers inside your cabinet.
  7. Measure and mark the desired position for that dividers along the highest and bottom panels make it easier to having a pencil. Slide the dividers into place vertically involving the upper and lower panels. Placing ensures bald dividers along the top and bottom in the divider panels.
  8. Cut a sheet of 1/2 inch (1.3 cm), based on what the total width and height of your cabinet.
  9. Attach the rear panel with nails along the plywood on top, bottom and side panels of the bottom edge. Place additional nails along the back panel dividers.
  10. Paint your cabinet to match existing decor in your room. Let it finish dry completely before proceeding.
  11. Place one of the shelves of DVD plastic storage cabinets mouth up within each compartment of your cabinet.
  12. Install the racking wooden screws placing 1/2 inch (1.3 cm) along the sides of the shelves within the wooden cabinet.

Gallery of How to Build a Plastic Storage Cabinets Shelves For Storing DVD

Write your feedback about "How to Build a Plastic Storage Cabinets Shelves For Storing DVD" here